Humboldt 98mm Cone Filling Machine Starter Kit

Humboldt Cone Filling Machines

Capacity: 55 holes


***Ships from our US warehouse*** Canadian sales taxes will be charged by Customs not by MJ Supply Co

How to use machine (video): Click Here


Fill up to 331 cones in one session with this 98mm Cone Filling Machine Starter KitFits 98mm, ¾ gram, or classic 98 special cones.

Our Starter Kit Comes with Everything You Need to Get Started


Fill up to 331 cones in one session with this 98mm Cone Filling Machine Starter Kit. Fits 98mm, ¾ gram, or classic 98 special cones.


Choose how many you want to fill at a time:


  • • 55X (Fills up to 55 cones in one session)
  • • 121X (Fills up to 121 cones in one session)
  • • 331X (Fills up to 331 cones in one session)


Each cartridge comes with a riser that will allow easy removal of the cones from the machine. Also included with each machine is a tamping tool that will aid in compressing your material during operation.


Our vibration table features an industrial quality electric motor that has been specially configured to efficiently and smoothly shake your material. Each motor is made from high quality stainless steel parts and is hand-configured and tested for quality control at our facility to ensure longevity and reliability.


The vibration table’s 8.75″ diameter rubberized surface reduces noise and prevents pre-mature wear. A 3/8″ tall barrier around the table’s surface prevents contents from falling off. Each vibration table comes with an extension cord with a power switch. Our stabilization mat will prevent the vibration table from bouncing around during operation on a hard surface.


This starter kit comes with one of each of the following:



How to use this Filling Machine Starter Kit:


  1. Place the stabilization mat on your work surface.
  2. Set the vibration table on top of the mat so that all of the table’s legs are within the fibrous area of the mat.
  3. Plug the vibration table into the switched extension cord, and plug the extension cord into a power outlet.
  4. Place the cartridge on the surface of the vibration table; set the riser and tamping tool aside for now.
  5. Fill the cartridge holes with your empty cones.
  6. Turn the vibration table on using the switch on the extension cord and begin filling the the top of the cartridge with your material.
  7. Use the included tamping tool to pack your material during operation.
  8. Once your cones are nearly full (leave some space to twist the end), turn the vibration table off.
  9. Lift the cone filling machine, and place the cone riser on top of the vibration table, underneath the cone filling machine.
  10. Rotate the cone filling machine while pressing it down on the riser. The riser will eventually slide into the bottom of the machine, while simultaneously lifting the filled cones.
  11. Remove each filled cone from the machine and twist the end to finish!


Our filling machines can be cleaned with hot water up to 130º F but will warp over time if used in a dishwasher.   We recommend using an isopropyl (rubbing alcohol) and salt mixture, commonly used to remove plant resin and residue.  Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.

You may also like

Recently viewed