Humboldt Cone Filling Machine Starter Kit for 109mm Cones

***Ships from our US warehouse*** Canadian sales taxes will be charged by Customs not by MJ Supply Co

How to use machine (video): Click Here

Fill up to 315 cones in one session with this 109mm Cone Filling Machine Starter Kit. Fits 109mm, 1 gram, or king size cones.

Our Starter Kit Comes with Everything You Need to Get Started

Fill up to 315 cones in one session with this 109mm Cone Filling Machine Starter Kit. Fits 109mm, 1 gram, or king size cones.

Choose how many you want to fill at a time:

• • 55X (Fills up to 55 cones in one session)
• • 121X (Fills up to 121 cones in one session)
• • 315X (Fills up to 315 cones in one session)

Each cartridge comes with a riser that will allow easy removal of the cones from the machine. Also included with each machine is a tamping tool that will aid in compressing your material during operation.

Our vibration table features an industrial quality electric motor that has been specially configured to efficiently and smoothly shake your material. Each motor is made from high quality stainless steel parts and is hand-configured and tested for quality control at our facility to ensure longevity and reliability.

The vibration table’s 8.75″ diameter rubberized surface reduces noise and prevents pre-mature wear. A 3/8″ tall barrier around the table’s surface prevents contents from falling off. Each vibration table comes with an extension cord with a power switch. Our stabilization mat will prevent the vibration table from bouncing around during operation on a hard surface.

This starter kit comes with one of each of the following:

• • Filling Machine Cartridge
• • Riser
• • Tamping Tool
• • Vibration Table
• • Stabilization Mat
• • Extension Cord with Power Switch

How to use this Filling Machine Starter Kit:

1. Place the stabilization mat on your work surface.
2. Set the vibration table on top of the mat so that all of the table’s legs are within the fibrous area of the mat.
3. Plug the vibration table into the switched extension cord, and plug the extension cord into a power outlet.
4. Place the cartridge on the surface of the vibration table; set the riser and tamping tool aside for now.
5. Fill the cartridge holes with your empty cones.
6. Turn the vibration table on using the switch on the extension cord and begin filling the the top of the cartridge with your material.
7. Use the included tamping tool to pack your material during operation.
8. Once your cones are nearly full (leave some space to twist the end), turn the vibration table off.
9. Lift the cone filling machine, and place the cone riser on top of the vibration table, underneath the cone filling machine.
10. Rotate the cone filling machine while pressing it down on the riser. The riser will eventually slide into the bottom of the machine, while simultaneously lifting the filled cones.
11. Remove each filled cone from the machine and twist the end to finish!

Our filling machines can be cleaned with hot water up to 130º F but will warp over time if used in a dishwasher.   We recommend using an isopropyl (rubbing alcohol) and salt mixture, commonly used to remove plant resin and residue.  Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.